manualshive.com logo in svg

Dell Dimension 4700C, Руководство пользователя

Поделиться
Скачать
Dell Dimension 4700C Скачать руководство пользователя страница 69

Removing and Installing Parts

69

5

Prepare the card for installation.
See the documentation that came with the card for information on configuring the card, 
making internal connections, or otherwise customizing it for your computer.

 

CAUTION: 

Some network adapters automatically start the computer when they are connected to a 

network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet 
before installing any cards.

6

If you are installing the card into the x16 card connector, position the card so the securing slot 
is aligned with the securing tab, and gently pull the securing tab.

7

Place the card in the connector and press down firmly. Ensure that the card is fully seated in 
the slot.

8

Ensure that:
•

The tops of all cards and filler brackets are flush with the alignment bar.

•

The notch in the top of the card or filler bracket fits around the alignment guide.

fully seated 
card

not fully 
seated card

bracket caught 
outside of slot

bracket 
within slot

Содержание Dimension 4700C





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды