Dell D560, Руководство пользователя

Страница: 33 / 33

Table 40. Riser configurations: FH - 1 CPU
Card type Slot priority Riser height Maximum number
of cards supported
Card length Card height Maximum
PCIe width
supported
LOM riser
a
: 2x 25 Gb 1 NONE 1 HL NONE x8
LOM riser: 2x 10 Gb
(10GBASE-T/SFP+) 1 NONE 1 HL NONE x8
BOSS M.2 (SATA) 2 FH 1 HL FH x16
PERC9+ Mini Integrated
slot LP 1 HL LP x8
a.
The LOM mezzanine riser contains the OCP network card.
Table 41. Riser configurations: LP+LP - 2 CPU
Card type Slot priority Riser height Maximum number
of cards supported
Card length Card height Maximum
PCIe width
supported
LOM riser
a
: 2x 25 Gb 1 NONE 1 HL NONE x8
LOM riser: 2x 10 Gb
(10GBASE-T/SFP+) 1 NONE 1 HL NONE x8
BOSS M.2 (SATA) 2 LP 2 HL LP x8
10 Gb NIC (Broadcom/
Intel/Qlogic) 3 LP 1 HL LP x8
10 Gb NIC (Intel) 3 LP 1 HL LP x4
25 Gb NIC (Broadcom/
Mellanox/Qlogic) 3 LP 1 HL LP x8
100 Gb NIC (Mellanox) 3 LP 1 HL LP x16
PERC9+ Mini Integrated
slot LP 1 HL LP x8
a.
The LOM mezzanine riser contains the OCP network card.
System fan
The VxRail D Series with SATA/SSD backplane supports up to six standard fans. The cabled fans are mounted between the
drives bay and the system board. Each fan has a single wire harness that plugs into the fan connectors on the system board
(Fan 1 through Fan 6).
Features of the cooling fans:
● Cooling fans are labeled FAN 1 through FAN 6.
●
Total of six cooling fans are populated for dual processor configurations.
● All cooling fans are cabled.
● Redundant cooling fan is supported with only one cooling fan failing at a time.
● All six cooling fans have the same part number.
● The cooling fan labels are printed on the fan caddy.
Table 42. Fan support matrix for the VxRail D Series
Front
Storage
PSU type CPU count Fan1 Fan2 Fan3 Fan4 Fan5 Fan6
8 x 2.5- inch Redundant
PSU only
1 Required Required Required Required Required Not required
2 Required Required Required Required Required Required
Replacing and adding hardware 33