Dell D15S, Руководство по обслуживанию

Страница: 35 / 91

Steps
1. Place the SD-card reader onto the connector on the system board.
2. Install the two screws (M3x5) that secure the SD-card bracket to the system board and computer.
3. Reroute the cables through the routing guides on the SD-card reader bracket.
Next steps
1. Install the 2.5/3.5-inch hard-drive caddy .
2. Install the hard-drive and optical-drive bracket .
3. Install the front bezel .
4. Install the side cover .
5. Follow the procedure in after working inside your computer .
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
3. Remove the front bezel .
4. Remove the 2.5/3.5-inch hard-drive caddy .
5. Remove the hard-drive and optical-drive bracket .
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
Removing and installing components 35