Dell D14S003, Руководство по обслуживанию

Страница: 21 / 56

Removing the optical drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Topics:
• Procedure
• Prerequisites
Procedure
1. Disconnect the data cable and power cable from the optical-drive assembly.
2. Disconnect the data cables and power cables from the hard-drive assembly.
3. Remove the two screws (#6-32xL6.35) that secure the drive cage to the chassis.
4. Push the release tab on the chassis and slide the drive cage off the chassis.
5. Turn the drive cage over and remove the three screws (M2xL2) that secure the optical-drive assembly to the drive cage.
6. Slide the optical-drive assembly out of the optical-drive bracket.
12
Removing the optical drive 21