Dell D14S003, Руководство по обслуживанию

Страница: 17 / 56

Replacing the 2.5-inch hard drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Topics:
• Procedure
• Post-requisites
Procedure
1. Slide the hard drive into the hard-drive bracket.
2. Align the screw holes on the hard drive with the screw holes on the hard-drive bracket.
3. Replace the four screws (M3xL3.5) that secure the hard drive to the hard-drive bracket.
4. Slide the hard-drive assembly towards the back of the slot on the drive cage until it snaps into place.
5. Align the screw holes on the top hard drive with the screw holes on the hard-drive bracket.
6. Replace the screw (#6-32xL3.6) that secures the hard-drive assembly to the drive cage.
7. Connect the data cables and power cables to the hard-drive assembly.
Post-requisites
Replace the computer cover .
9
Replacing the 2.5-inch hard drive 17