Dell D11S004 Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 75

background image

Troubleshooting

Topics:

•

Enhanced Pre-Boot System Assessment — ePSA diagnostics

•

Diagnostics

•

Diagnostic error messages

•

System error messages

Enhanced Pre-Boot System Assessment — ePSA
diagnostics

The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded
with the BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular
devices or device groups allowing you to:

The ePSA diagnostics can be initiated by the FN+PWR buttons while powering on the computer.

●

Run tests automatically or in an interactive mode

●

Repeat tests

●

Display or save test results

●

Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

●

View status messages that inform you if tests are completed successfully

●

View error messages that inform you of problems encountered during testing

NOTE:

Some tests for specific devices require user interaction. Always ensure that you are present at the computer

terminal when the diagnostic tests are performed.

Running the ePSA Diagnostics

Invoke diagnostics boot by either of the methods that are suggested below:

1. Power on the computer.
2. As the computer boots, press the F12 key when the Dell logo is displayed.
3. In the boot menu screen, use Up/Down arrow key to select the

Diagnostics

option and then press

Enter

.

NOTE:

The

Enhanced Pre-boot System Assessment

window displays, listing all devices detected in the computer.

The diagnostics starts running the tests on all the detected devices.

4. Press the arrow in the lower-right corner to go to the page listing.

The detected items are listed and tested.

5. To run a diagnostic test on a specific device, press Esc and click

Yes

to stop the diagnostic test.

6. Select the device from the left pane and click

Run Tests

.

7. If there are any issues, error codes are displayed.

Note the error code and contact Dell.

Diagnostics

The computer POST (Power On Self Test) ensures that it meets the basic computer requirements and the hardware is working
appropriately before the boot process begins. If the computer passes the POST, the computer continues to start in a normal
mode. However, if the computer fails the POST, the computer emits a series of LED codes during the start-up. The system LED
is integrated on the Power button.

5

68

Troubleshooting

«
...
66
67
68
69
70
...
»

Содержание D11S004












































































Отзывы:

Нет отзывов

Похожие инструкции для D11S004

Бренд: Radio Shack Страницы: 30

Бренд: Radio Shack Страницы: 42

Бренд: Radio Shack Страницы: 192

Бренд: Radio Shack Страницы: 274

Бренд: Radio Shack Страницы: 44

Бренд: Radio Shack Страницы: 30

Бренд: Zenith Страницы: 98

Бренд: IBM Страницы: 158

Бренд: IBASE Technology Страницы: 68

Бренд: Digital Equipment Страницы: 321

Бренд: LDI Spaces Страницы: 5

NetVista A40i 2251

Бренд: IBM Страницы: 98

VAIO Digital Studio PCV-RS100

Бренд: Sony Страницы: 1

VAIO Digital Studio PCV-RX590G

Бренд: Sony Страницы: 1

VAIO Digital Studio PCV-R536DS

Бренд: Sony Страницы: 1

Vaio Digital Studio PCV-R522DS

Бренд: Sony Страницы: 1

SVL241 L Series

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды