manualshive.com logo in svg

Dell Color Laser Printer 2130cn, Руководство пользователя

Поделиться
Скачать
Dell Color Laser Printer 2130cn Скачать руководство пользователя страница 139

To connect the printer to the network, plug one end of an Ethernet cable into the Ethernet port on the back of the printer, and the other end into a LAN drop 
or hub. For a wireless connection, insert the wireless printer adapter into the wireless printer adapter socket on the back of the printer. 

For a wireless connection, refer to 

"Installing and Configuring the Wireless Printer Adapter"

. 

 

 

Turn On the Printer 

 

 

1.

Plug one end of the power cable into the socket at the back of the printer and the other end into a properly grounded outlet.  
 

  

Do not use extension cords or power strips. 

The printer should not be plugged into a UPS system. 

 

 

2.

Turn on the computer and the printer.  
 

  

 

 

Print and Check the Printer Settings Page 

Print the printer settings page.  

 

 

When Using the Operator Panel  

 

 

1.

Press 

Menu

 button.  

 

 

  

2.

Ensure 

Report/List

 appears, and then press 

 

(Set)

 button.  

 

 

  

3.

Printer Setting

 is displayed. Press 

 

(Set)

 button.  

 

The printer settings page is printed. 

 

 

4.

If the IP address shows anything other than 

0.0.0.0

 (the factory default) or 

169.254.xx.xx

, the printer has an IP address assigned and stored. Go to 

"

Verify the IP Settings

."  

 

 

 

When Using the Tool Box  

 

 

1.

Click 

start

®

 

All Programs

®

 

Dell Printers

®

 

Dell 2130cn Color Laser Printer

®

 

Tool Box

.  

 

The 

Select Printer 

dialog box opens. 

 

 

2.

Click the name of this printer listed in 

Printer Name

, and then click 

OK

.  

Downloaded from ManualsPrinter.com Manuals

Содержание Color Laser Printer 2130cn













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды