Dell Chromebook 3100, Руководство по обслуживанию

Страница: 34 / 94

9. Connect the Type-C power cable to the connector on the Input Output board. Adhere the Type-C power cable onto the
system board and Input Output board.
Next steps
1. Install the WWAN card for 4G LTE enabled systems.
2. Install the base cover .
3. Follow the procedure in after working inside your computer .
System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
4. Remove the SIM card .
About this task
The following image indicates the connectors on your system board.
Figure 1. System-board connectors
1. 30-pin FFC Input Output board cable ( 30-pin FPC Input
Output board cable for systems enabled with 4G LTE)
2. LTE signal cable (For systems enabled with 4G LTE)
3. Display cable 4. 40-pin FFC Input Output board cable
5. Type-C power cable 6. Touchpad cable
7. Keyboard cable 8. Battery cable
9. Speaker cable
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
NOTE: The following image is from 4G LTE enabled systems. For WiFi enabled systems, the system board has a different
configuration.
34 Removing and installing components