Dell C9000 series, Справочное руководство

Страница: 1717 / 2286

VRF disabled
Extended-Bridge enabled
Related
Commands pe provision — Logically provision or add a PE.
location-led
Toggle the location LED of a specified interface, linecard or port extender (PE) on or off.
C9000 Series
Syntax
location—led {interface interface | linecard slot-id | pe pe-id
stack-unit unit-number | rpm slot-id }{off|on}
Parameters
interface interface Enter the following keywords and slot/port or number
information:
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
gigabitethernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
linecard slot-id Enter the keyword
linecard
and the slot ID. The linecard slot-
id range is from 0 to 9.
pe pe-id Enter the keyword
pe
and the PE ID. The range is from 0 to 255.
stack-unit unit
number
Enter the keyword
stack-unit
and the stack unit number. The
range is from 0 to 7.
rpm slot-id Enter the keyword
rpm
and specify the route processor slot ID.
RPM slot-id values are rpm0 and rpm1 .
on |off Turn the location LED(s) of the specified interfaces, linecard,
port extenders (PE), ports and RPMs on or off.
Default
None
Command Modes
EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
Port Extenders (PE) 1717