7. Toner fill plug removed. Note the original positioning of the
plug for reassembly.
SEPARATING THE TONER CARTRIDGE
8. Locate the gear side of the cartridge shown. Holding the
gear end cap, remove the outer jacket (highlighted) of the car-
tridge by sliding it out as shown.
9. Cartridge separated. Note the original positioning of the
outer container. Clean thoroughly using compressed air.
ALTERNATE CLEARSEAL
™
ASSEMBLY
10. First, using a pair of pliers, gently peel off the worn sealant
(shown) from the toner cartridge.
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
DELL C 5100 CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Summit Technologies is a division of UniNet Imaging Inc.
w w w.
u n i n e t
i m a g i n g . c o m
USA
•
UK
•
EUROPE
•
AFRICA
•
JAPAN
•
CHINA
•
BRAZIL
•
MEXICO
•
COLOMBIA
•
ARGENTINA
•
VENEZUELA
11124 Washington Blvd., Culver City, CA, U.S.A. 90232
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
OUTER CONTAINER
(SLIDES OUT)
GEARSIDE
END CAP
