Dell Alienware m17, Руководство по обслуживанию

Страница: 96 / 119

Removing the power-adapter port
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Prerequisites
1. Remove the base cover .
2. Remove the battery (half-length) or the battery (full-length) , whichever applicable.
3. Follow the procedure from step 1 to step 3 in Removing the hard drive .
4. Remove the wireless card .
5. Remove the solid-state drive/Intel Optane .
6. Follow the procedure from step 1 to step 5 in Removing the heat sink .
7. Remove the system board .
Procedure
1. Remove the two screws (M2.5x4.5) that secure the power-adapter port bracket to the palm-rest assembly.
2. Lift the power-adapter port bracket off the palm-rest assembly.
3. Lift the power-adapter port from the slot on the palm-rest assembly.
4. Peel the Mylar off the power-button board.
5. Remove the power-adapter port cable from the routing guides on the palm-rest assembly and lift the power-adapter port
along with its cable off the palm-rest assembly.
48
96 Removing the power-adapter port