Dell Alienware m17 R3 Скачать руководство пользователя страница 72

Страница: 72 / 79

Table 8. Secure Boot

(continued)

Option

Description

Boot Option #2

Displays the available second boot option.

Boot Option #3

Displays the available third boot option.

Secure boot

Table 9. Secure Boot

Option

Description

Boot List Option

Displays the available boot options.
•

Legacy

•

UEFI

Default: UEFI

File Browser Add Boot Option

Enables you to add the boot options.

File Browser Del Boot Option

Enables you to delete the boot options.

Secure Boot

Enables or disables the Secure Boot Feature.
Choose one of the options:
•

Secure Boot Enable

•

Secure Boot Disable

Default: Enabled

Legacy Option ROMs

Enables or disables the Legacy Option ROMs.
Default: Disabled

Attempt Legacy Boot

Enables or disables Attempt Legacy Boot.
Default: Disabled

Boot Option Priorities

Displays the boot sequence.

Boot Option #1

Displays the available first boot option.

Boot Option #2

Displays the available second boot option.

Boot Option #3

Displays the available third boot option.

Updating the BIOS in Windows

Prerequisites
It is recommended to update your BIOS (System Setup), when you replace the system board or if an update is available. For laptops,

ensure that your computer battery is fully charged and connected to a power outlet.

About this task

NOTE: If BitLocker is enabled, it must be suspended before updating the system BIOS, and then re-enabled after the BIOS
update is completed.

Steps
1. Restart the computer.
2. Go to

www.dell.com/support

•

Enter the Service Tag or Express Service Code and click Submit.

•

Click Detect Product and follow the on-screen instructions.

Содержание Alienware m17 R3
















































































Результаты поиска

Содержание Alienware m17 R3

Отзывы:

Бренды по названию

Популярные бренды

Dell Alienware m17 R3, Руководство по обслуживанию

Результаты поиска

Содержание Alienware m17 R3

Отзывы:

Бренды по названию

Популярные бренды