Dell Alienware m15 R2, Руководство по обслуживанию

Страница: 38 / 70

Steps
1
Using the alignment posts, place the left speaker on the palm-rest assembly.
NOTE: Ensure that the alignment posts are threaded through the rubber grommets on the speaker.
2 Route the speaker cable through the routing guides on the palm-rest assembly.
3 Using the alignment posts, place the right speaker on the palm-rest assembly.
NOTE: Ensure that the alignment posts are threaded through the rubber grommets on the speaker.
4 Connect the speaker cable to the right I/O-board.
Next step
1 Install the battery .
2 Install the 2230 solid-state drive . (if applicable)
3 Install the 2280 solid-state drive . (if applicable)
4 Install the base cover .
5 Follow the procedure in After working inside your computer .
System board
Removing the system board
Prerequisites
1 Follow the procedure in Before working inside your computer .
2 Remove the base cover .
3 Remove the 2230 solid-state drive . (if applicable)
4 Remove the 2280 solid-state drive . (if applicable)
5 Remove the rear I/O-cover .
6 Remove the battery .
7 Remove the right I/O-board .
38