Dell Alienware M11xR2 Скачать руководство пользователя

Страница: 2 / 43

Back to Contents Page

Battery Pack

Alienware

M11x R2 Service Manual

Removing the Battery Pack

Replacing the Battery Pack

Removing the Battery Pack

Follow the instructions in

Before You Begin

Remove the base cover (see

Removing the Base Cover

Remove the two screws that secure the battery pack to the computer base.

Disconnect the battery pack cable from the connector on the system board.

Using the pull-tab, lift the battery pack off the computer base.

Replacing the Battery Pack

Follow the instructions in

Before You Begin

Place the battery pack in the battery bay and replace the two screws that secure the battery pack to the computer base.

Route the battery pack cable in the routing guide.

Connect the battery pack cable to the connector on the system board.

Replace the base cover (see

Replacing the Base Cover

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid damage to the computer, use only the battery designed for this particular Alienware

computer. Do not use batteries

designed for other Alienware computers.

battery pack cable

battery pack

screws (2)

pull tab

CAUTION:

To avoid damage to the computer, use only the battery designed for this particular Alienware computer.

Содержание Alienware M11xR2












































Результаты поиска

Содержание Alienware M11xR2

Отзывы:

Похожие инструкции для Alienware M11xR2

Бренды по названию

Популярные бренды

Dell Alienware M11xR2, Руководство по обслуживанию

Результаты поиска

Содержание Alienware M11xR2

Отзывы:

Похожие инструкции для Alienware M11xR2

Бренды по названию

Популярные бренды