Dell Alienware Area-51 R5, Руководство по обслуживанию, Страница: 43 / 121

Removing the memory modules
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer . After working inside your computer, follow the instructions in After working
inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Prerequisites
1. Remove the stability foot .
2. Remove the left and right side-panels. See “ Removing the side panels ”.
Procedure
1. Lay the chassis on the right side.
2. Locate the memory modules on the system board.
3. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot.
4. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
NOTE: Repeat step 2 to step 4 to remove any other memory modules installed in your computer.
43