Dell Alienware 13 R3, Руководство по обслуживанию

Страница: 18 / 78

Replacing the solid-state drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your computer . After working inside your computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance .
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Topics:
• Procedure
• Post-requisites
Procedure
NOTE: Adhere the thermal pad on the copper foil area, if the thermal pads are shipped with the solid-state drive.
1. Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state
drive slot.
2. Press the other end of the solid-state drive to align the screw hole on the solid-state drive with the screw hole on the computer
base.
3. Replace the screw (M2x3) that secures the solid-state drive to the computer base.
Post-requisites
Replace the base cover .
18