Dell 6224 - PowerConnect Switch - Stackable, Руководство по началу работы

Страница: 113 / 282

Erste Schritte
111
Schritt 3:
Next, an IP address is set up. The IP address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is
the IP address you use to access the CLI, Web interface, or SNMP
interface for the switch.
To set up an IP address:
Please enter the IP address of the device (A.B.C.D):
1
92.168.1.100 <Enter>
Please enter the IP subnet mask (A.B.C.D or /nn):
255.255.255.0 <Enter>
Schritt 4:
Finally, set up the gateway. Please enter the IP address of the
gateway from which this network is reachable (e.g. 192.168.1.1):
192.168.1.1 <Enter>
This is the configuration information that has been collected:
SNMP Interface = "Dell_Network_Manager"@192.168.1.10
User Account set up = admin
Password = **********
Management IP address = 192.168.1.100:255.255.255.0
Gateway = 192.168.1.1
Schritt 5:
If the information is correct, please select (Y) to save the
configuration, and copy to the start-up configuration file. If the
information is incorrect, select (N) to discard configuration and
restart the wizard: [Y/N] y <Enter>
Thank you for using the Dell Easy Setup Wizard. You will now enter
CLI mode.