Dell 610D, Руководство по обслуживанию, Страница: 23 / 47

Back to Contents Page
Keyboard
Dell™ Latitude™ D610 Service Manual
Removing the Keyboard
Installing the Keyboard
Removing the Keyboard
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the center control cover (see " Removing the Center Control Cover ").
3. Remove the two M2.5 x 5-mm screws across the top of the keyboard.
4. Lift and rotate the keyboard clockwise 90 degrees to access the pull-tab.
5. Using the keyboard cable pull-tab, pull up to disconnect the keyboard cable connector from the keyboard connector on the system board.
6. Remove the keyboard (see " Removing the Keyboard ").
Installing the Keyboard
1. Connect the keyboard cable connector to the keyboard connector on the system board.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide .
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: When you remove the keyboard, pull up gently to avoid damaging the keyboard cable.
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
NOTE: When you replace the keyboard, ensure that the keyboard tabs are completely in place to avoid scratching the palm rest.
1 M2.5 x 5-mm screws (2)
2 keyboard cable pull-tab
3 keyboard connector on system board
4 keyboard tabs (5)
5 palm rest