Dell 5110 Color Laser Скачать руководство пользователя страница 39

Страница: 39 / 90

Wireless Mini-Card(s)

Replacing the Mini-Card(s)

Follow the instructions in "Before You Begin" on page 9.

Remove the new Mini-Card from its packaging.

CAUTION:

Use firm and even pressure to slide the card into place. If you use

excessive force, you may damage the connector.

CAUTION:

The connectors are keyed to ensure correct insertion. If you feel

resistance, check the connectors on the card and on the system board, and realign
the card.

CAUTION:

To avoid damage to the Mini-Card, never place cables under the card.

Insert the Mini-Card connector at a 45-degree angle into the system-board

connector.

Press the other end of the Mini-Card down into the slot on the system

board and replace the screw that secures the Mini-Card to the system

board.

Connect the appropriate antenna cables to the Mini-Card you are

installing. The following table provides the antenna cable color scheme for

the Mini-Cards supported by your computer.

If you are replacing the WiMax/WWAN Mini-Card:
Replace the module cover (see "Replacing the Module Cover" on page 20).

If you are replacing the WLAN Mini-Card:

Connectors on the Mini-Card

Antenna Cable Color Scheme

WLAN (2 antenna cables)

Main WLAN (white triangle)
Auxiliary WLAN (black triangle)

white
black

WiMax/WWAN

(2 antenna cables)

Main WiMaX/WWAN (white

triangle)
Auxillary WiMaX/WWAN (black

triangle)

white with gray stripe
black with gray stripe

Содержание 5110 Color Laser



























































































Результаты поиска

Содержание 5110 Color Laser

Отзывы:

Dell 5110 Color Laser, Руководство по обслуживанию, Страница: 39 / 90

Результаты поиска

Содержание 5110 Color Laser

Отзывы: