Dell UPS Site Preparation Guide, EMEA (230V)
Revision 1, February 2012
Optional 32A 1phase, 3m, UPS Input Cord Kit
If you ordered the optional 32A input cord kit, refer to the below drawings for advice on fitting the cable:
Step 1:
Remove the cover-plate from the rear of the UPS
to access rear-plate terminals and cable access port
Step 2:
Remove the back (side nearest cable bare ends)
of the plastic stuffing gland from the input cord kit
Step 3:
Thread the input cord through the UPS back-
plate and secure with the plastic stuffing gland. Ensure
you leave enough free cord to connect to the UPS
terminals.
Step 4:
Secure the bare cable ends to the UPS terminals
& replace the cover-plate.
Wire Colour
Terminal Position
UPS Wire Function
Terminal Wire Size Rating
Tightening Torque
Grey/Yellow Stripe
G
Input Ground
5.26-16mm
2
(10-6AWG)
2.26Nm
(20 lb in)
Blue
N
Neutral In
Brown
L
Line (Live) In