manualshive.com logo in svg

Dell 3348 - PowerConnect Switch - Stackable, Руководство пользователя

Поделиться
Скачать
Dell 3348 - PowerConnect Switch - Stackable Скачать руководство пользователя страница 337

C o n f i g u r i n g   Q u a l i t y   o f   S e r v i c e

337

QoS includes traffic such as voice, video, and real-time traffic that can be assigned a high 
priority queue, while other traffic can be assigned a lower priority queue. The result is an 
improved traffic flow for traffic with high demand.

QoS is defined by:

•

Classification

—Specifies which packet fields are matched to specific values. All 

packets matching the user-defined specifications are classified together.

•

Action

—Defines traffic management where packets being forwarded are based on 

packet information, and packet field values such as VLAN priority (VPT) and DSCP 
(DiffServ Code Point).

•

Prioritization

—Traffic is assigned a priority and queued on the appropriate queue for 

forwarding.

Class of Service (CoS) Information

Eight CoS values can be mapped to one of four forwarding queues (queue 1 to 4). Each 
queue has a different priority. The first queue has the lowest forwarding priority, while the 
fourth queue has the highest forwarding priority and is not mapped by default. 

 NOTE: 

In a stacking configuration, Queue 4 is used for forwarding stacking traffic. Therefore, 

assigning additional traffic to Queue 4 may interfere with stack control.

There are three mapping tables:

•

CoS to Queue Mapping Table.

•

DSCP to Queue Mapping Table.

•

TCP/UDP to Queue Mapping Table. The TCP/UDP table is empty by default.

The 

Cos to Queue Mapping Table

 has default CoS mapping to forwarding queue values: 

CoS Value

Forwarding Queue Values

0

q2 

1

q1 (Lowest Priority = Best Effort)

2

q1 (Lowest Priority = Best Effort)

3

q2

4

q2

5

q3

6

q3

Содержание 3348 - PowerConnect Switch - Stackable



























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды