Dell 2355 Mono Laser Скачать руководство пользователя страница 8

Страница: 8 / 181

Precautions

1-4

Service Manual

1.2.5 Disregarding this warning may cause bodily injury

(1) Be careful with the high temperature part.

The fuser unit works at a high temperature. Use caution when working on the printer. Wait for the fuser to
cool down before disassembly.

(2) Do not put ﬁnger or hair into the rotating parts.

When operating a printer, do not put hand or hair into the rotating parts (Paper feeding entrance, motor,
fan, etc.). If do, you can get harm.

(3) When you move the printer

This printer weighs 17.7 kg including toner cartridge and cassette. Use safe lifting and handling

techniques. Use the lifting handles located on each side of the machine. Back injury could be caused if
you do not lift carefully.

(4) Ensure the printer is installed safely.

The printer weighs 17.7 kg, ensure the printer is installed on a level surface, capable of supporting its

weight. Failure to do so could cause the printer to tip or fall possibly causing personal injury or damaging
the printer.

(5)

Do not install the printer on a sloping or unstable surface. After installation, double check that the printer

is stable.

Содержание 2355 Mono Laser






















































































































































































Результаты поиска

Содержание 2355 Mono Laser

Отзывы:

Похожие инструкции для 2355 Mono Laser

Бренды по названию

Популярные бренды

Dell 2355 Mono Laser, Руководство по обслуживанию

Результаты поиска

Содержание 2355 Mono Laser

Отзывы:

Похожие инструкции для 2355 Mono Laser

Бренды по названию

Популярные бренды