Dell 1RK30-0AF, Руководство по началу работы

Страница: 21 / 62

Dell Secure Mobile Access 6200/7200 Getting Started Guide
21
About installation and
deployment
This section outlines the process of installing, configuring, and
testing the appliance, and then deploying it in a production
environment.
Table 3 provides an overview of the steps.
Table 3. Installation and deployment process
Installation Step Description
Make a note of your
appliance serial
number and
authentication code. You’ll need this information when you
register your product on MySonicwall.
The serial number and authentication
code are printed on your appliance
label; they are also displayed on the
General Settings page in AMC.
Rack-mount the
appliance and
connect the cables. See Rack mounting the appliance on
page 37 and Connecting the appliance
on page 24 .
Turn on the appliance
and begin
configuration. To connect to your appliance on your
internal network you must specify an
internal IP address, the subnet mask,
and indicate whether your appliance
is part of a cluster. Use the controls
on the front of the appliance. See
Entering network settings using the
LCD
on page 24 .
Run Setup Wizard. The wizard guides you through the
process of initial setup for your SMA
appliance. See
Running the Setup
Wizard on page 25 .
Register your
appliance on
MySonicwall. Register your appliance on
MySonicwall. Product registration
gives you access to essential
resources, such as your license file
and updates. To register, you need
both the serial number for your
appliance and its authentication
code.
Table 3. Installation and deployment process
Installation Step Description