Dell 1555 - Studio - Chainlink Скачать руководство пользователя страница 8

Страница: 8 / 49

Back to Contents Page

Center Control Cover

Dell Studio™ 1555 Service Manual

Removing the Center Control Cover

Replacing the Center Control Cover

Removing the Center Control Cover

Follow the procedures in

Before You Begin

Remove the screw securing the center control cover from the battery bay.

Turn the computer over and open the display as far as possible.

Pry out the center control cover with a plastic scribe starting from the battery bay location at the back of the computer.

Ease the center control cover up.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist= grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working

inside the computer.

center control cover

Содержание 1555 - Studio - Chainlink


















































Результаты поиска

Содержание 1555 - Studio - Chainlink

Отзывы:

Похожие инструкции для 1555 - Studio - Chainlink

Бренды по названию

Популярные бренды

Dell 1555 - Studio - Chainlink, Руководство по обслуживанию

Результаты поиска

Содержание 1555 - Studio - Chainlink

Отзывы:

Похожие инструкции для 1555 - Studio - Chainlink

Бренды по названию

Популярные бренды