Figure 57. Installing the expansion riser 2A
Figure 58. Installing the expansion riser 2B
Next steps
1. Follow the procedure listed in
After working inside your system
2. Install any device drivers required for the card as described in the documentation for the card.
Removing expansion card from the expansion card riser
Prerequisites
1. Follow the safety guidelines listed in
on page 71.
2. Follow the procedure listed in
Before working inside your system
3. If applicable,
4. If applicable, disconnect the cables from the expansion card.
5. When removing a card from riser 2 or 3, ensure that the PCIe card holder latch is closed.
Installing and removing system components
117
