Drives
The VxRail P Series, V Series, and S Series appliances supports SAS, SATA, Nearline
SAS drives or SSDs.
This table lists out the supported drive options for the VxRail P Series, V Series, and S
Series appliances:
Table 20 Supported drive options for the VxRail P Series, V Series, and S Series appliances
VxRail S Series
appliance
configuration
14 drives
appliance
Up to 12 3.5 inch (Nearline SAS) front accessible
drives in slots 0 to 11, and up to two 3.5 inch (SAS)
rear accessible drives in slots 12 to 13
VxRail P Series and V
Series appliances
configuration
24 drives
appliance
Up to 24 2.5 inch (SAS, SATA or Nearline SAS)
front accessible drives in slots 0 to 23
Ports and connectors specifications
USB ports
The VxRail P Series, V Series, and S Series appliances supports:
l
Two USB 2.0-compliant ports on the front of the appliance
l
One internal USB 3.0-compliant port
l
One micro USB 2.0-compliant port in the front of the appliance for iDRAC Direct
l
Two USB 3.0-compliant ports on the back of the appliance
NIC ports
The VxRail P Series, V Series, and S Series appliances supports up to four Network
Interface Controller (NIC) ports that are integrated on the network daughter card
(NDC), and are available in the following configurations:
l
Four RJ-45 ports that support 100 M, 1 G, and 10 Gbps
l
Four SFP+ ports that support up to 10 Gbps
Note
You can install additional PCIe NIC cards. For more information on the PCIe NIC cards,
see
Expansion card installation guidelines
on page 45.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the appliance to a VGA
display. The VxRail P Series, V Series, and S Series appliances supports two 15-pin
VGA ports on the front and back panels.
Technical specifications
30
VxRail Appliances on 14th Generation PowerEdge
P Series, V Series, and S Series Appliance Owner's Manual
