manualshive.com logo in svg
  • Главная
  • /
  • Dell EMC
  • /
  • VMAX
  • /
  • Конфигурация и методические рекомендации по лучшим практикам: технические заметки

Dell EMC VMAX, Конфигурация и методические рекомендации по лучшим практикам: технические заметки

Поделиться
Скачать
Dell EMC VMAX Скачать руководство пользователя страница 15

15 

 

   1 port1\path0\tgt4\lun0  c1t4d0     FA  8e:00 active   alive      0      0 
  
Pseudo name=harddisk2 
Symmetrix ID=000195703184 
Logical device ID=0159 
Device WWN=60000970000195703184533030313539 
state=alive; policy=SymmOpt; queued-IOs=0 
============================================================================== 
--------------- Host ---------------   - Stor -  -- I/O Path --   -- Stats --- 
###  HW Path               I/O Paths    Interf.  Mode     State   Q-IOs Errors 
============================================================================== 
   2 port2\path0\tgt4\lun1  c2t4d1     FA  7e:00 active   alive      0      0 
   1 port1\path0\tgt4\lun1  c1t4d1     FA  8e:00 active   alive      0      0 
  
Pseudo name=harddisk3 
Symmetrix ID=000195703184 
Logical device ID=015A 
Device WWN=60000970000195703184533030313541 
state=alive; policy=SymmOpt; queued-IOs=0 
============================================================================== 
--------------- Host ---------------   - Stor -  -- I/O Path --   -- Stats --- 
###  HW Path               I/O Paths    Interf.  Mode     State   Q-IOs Errors 
============================================================================== 
   2 port2\path0\tgt4\lun2  c2t4d2     FA  7e:00 active   alive      0      0 
   1 port1\path0\tgt4\lun2  c1t4d2     FA  8e:00 active   alive      0      0 

Pseudo name=harddisk4 
Symmetrix ID=000195703184 
Logical device ID=015B 
Device WWN=60000970000195703184533030313542 
state=alive; policy=SymmOpt; queued-IOs=0 
============================================================================== 
--------------- Host ---------------   - Stor -  -- I/O Path --   -- Stats --- 
###  HW Path               I/O Paths    Interf.  Mode     State   Q-IOs Errors 
============================================================================== 
   2 port2\path0\tgt4\lun3  c2t4d3     FA  7e:00 active   alive      0      0 
   1 port1\path0\tgt4\lun3  c1t4d3     FA  8e:00 active   alive      0      0 

… 

After completing the prerequisites, the application host or cluster is zoned to the target array FA ports. The ports that the target devices 
will be masked to is determined automatically by NDM based on where the host HBAs are zoned. 

Note: Workload Planner (WLP) is a Unisphere utility that can be used to determine the ideal target ports to use for an 
NDM migration. If WLP is used, it must be run from a control host that has access to both arrays. It cannot be run from 
Embedded Unisphere for VMAX. 

SET UP THE ENVIRONMENT 

Once the required pre-migration tasks are completed, the environment can be setup using NDM. All further steps required to setup and 
perform the migrations will now be handled automatically by NDM.  

The Environment Setup configures the migration environment that will be required to migrate any application from the source array to 
the target array. It confirms that both the source and target arrays can support the NDM operations. This includes ensuring that a 
useable replication pathway for data migration is available between the source and target arrays and creating an SRDF group for the 
migration. The setup only must be run once. When the migration pathways and SRDF group are configured, all storage groups on the 
source array can be migrated until all migrations from the source to the target have been completed. 

Содержание VMAX



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды