Figure 18. Installing the system cover
Next step
Follow the procedure listed in
After working inside your system
Front IO board
The front IO board features multiple expansion slots and storage options:
•
Two M.2 ports
•
eSATA port
•
Internal USB port 2.0
•
VGA port
•
Smart Card Reader
Removing the front IO board
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
.
4
If applicable, remove the card from the card reader.
Steps
1
Disconnect the cables connected to the IO board.
2
Using a Phillips #2 screwdriver, remove the screws securing the I/O board to the chassis.
3
Gently lift the I/O board and then slide the board toward the rear of the system until the connectors are clear of the slots on the front
of the system.
60
Installing and removing system components
