Dell EMC PowerEdge T40, Инструкция по установке и обслуживанию

Страница: 51 / 96

Figure 27. Removing a memory module
Next steps
1. Replace a memory module .
Installing a memory module
Prerequisites
1. Follow the safety guidelines listed in Safety instructions .
2. Follow the procedure that is listed in Before working inside your system .
Steps
1. Locate the appropriate memory module socket.
CAUTION: Handle each memory module only by the card edges, ensuring not to touch the middle of the memory
module or metallic contacts.
CAUTION: To prevent damage to the memory module or the memory module socket during installation, do not bend
or flex the memory module; insert both ends of the memory module simultaneously.
2. Open the ejectors on the memory module socket outward to allow the memory module to be inserted into the socket.
3. Align the edge connector of the memory module with the alignment key of the memory module socket, and insert the memory module
in the socket.
CAUTION: Do not apply pressure at the center of the memory module; apply pressure at both ends of the memory
module evenly.
NOTE: The memory module socket has an alignment key that enables you to install the memory module in the socket
in only one orientation.
4. Press the memory module with your thumbs until the socket levers firmly click into place.
Installing and removing system components 51