manualshive.com logo in svg

Dell EMC PowerEdge R940xa, Инструкция по установке и обслуживанию, Страница: 150 / 177

Поделиться
Скачать
Dell EMC PowerEdge R940xa Скачать руководство пользователя страница 150

d. Re-enable the Trusted Platform Module (TPM). For more information, see 

Upgrading the Trusted Platform Module (TPM)

.

7. Import your new or existing iDRAC Enterprise license.

For more information, see iDRAC User's Guide, at 

www.dell.com/idracmanuals

.

Restore the service tag using Easy Restore

The Easy Restore feature allows you to restore your Service Tag, iDRAC license, UEFI configuration, and the system configuration data 
after replacing the system board. All data is backed up automatically in a backup flash drive device. If BIOS detects a new system board, 
and the Service Tag in the backup Flash device is different, BIOS prompts the user to restore the backup information.

About this task

Following is a list of options available:

1. Restore the Service Tag, iDRAC license, and diagnostics information, press 

Y.

2. Navigate to the Lifecycle Controller based restore options, press

 N.

3. Restore data from a previously created 

Hardware Server Profile

, press 

F10.

NOTE: 

When the restore process is complete, BIOS prompts to restore the system configuration data.

4. To restore the system configuration data, press 

Y

5. To use the default configuration settings, press 

N

NOTE: 

After the restore process is complete, system reboots.

NOTE: 

If restoring the Service Tag is successful, you can check the Service Tag information in the System Information 

screen and compare it with the Service Tag on the system.

Manually updating Service Tag

After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using 

System Setup

.

About this task

If you know the system Service Tag, use the 

System Setup

 menu to enter the Service Tag.

Steps

1. Turn on the system.
2. To enter the 

System Setup

, press 

F2

.

3. Click 

Service Tag Settings

.

4. Enter the Service Tag.

NOTE: 

You can enter the Service Tag only when the Service Tag field is empty. Ensure that you enter the correct 

Service Tag. After the Service Tag is entered, it cannot be updated or changed.

5. Click 

OK

.

150

Installing and removing system components

Содержание PowerEdge R940xa


















































































































































































Отзывы:

Нет отзывов