Next steps
Replace the expansion card riser.
Installing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Before working inside your system
.
3. If removed, install the expansion cards into the expansion card risers.
Steps
1. Holding the touch points, align the expansion card riser with the connector and the riser guide pin on the system board.
2. Lower the expansion card riser into place until the expansion card riser connector is fully seated in the connector.
NOTE:
The numbers on the image does not depict the exact steps. The numbers are just for representation of
sequence.
Figure 55. Installing the low profile left riser
NOTE:
For low profile riser right, tighten the captive screw to secure the riser to the system board.
74
Installing and removing system components
