Drives
MX5016s supports sixteen hot-swappable 2.5-inch SAS drives. Drives numbered 0 through 9 are located on the left side of the enclosure,
and 10 through 15 are located on the right side of the enclosure.
Figure 12. Drive numbering
Removing a drive blank
Prerequisites
1. Follow the safety guidelines listed in
on page 14.
2.
Steps
1. Hold and press the touch points on the blank to disengage the guides on the blank from the drive slot.
2. Lift the blank away from the drive slot.
20
Installing and removing system components
