Dell EMC E46S001, Инструкция по установке и обслуживанию

Страница: 95 / 184

Figure 49. Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
Next step
Installing a 3.5-inch drive adapter into the 3.5-inch drive carrier
Installing a 3.5-inch drive adapter into the 3.5-inch drive
carrier
Prerequisites
1 Follow the safety guidelines listed in Safety instructions .
2 Install the 2.5-inch drive into the 3.5-inch drive adapter.
Steps
1 Insert the 3.5-inch drive adapter into the 3.5-inch drive carrier with the connector end of the drive toward the back of the 3.5-inch
drive carrier.
2 Align the screw holes on the 3.5-inch drive adapter with the holes on the 3.5-inch drive carrier.
3 Using a Phillips #1 screwdriver, secure the 3.5-inch drive adapter to the 3.5-inch carrier.
Installing and removing system components 95