background image

Getting help

Topics:

Contacting Dell EMC

Documentation feedback

Accessing system information by using QRL

Receiving automated support with SupportAssist 

Recycling or End-of-Life service information

Contacting Dell EMC

Dell EMC provides several online and telephone based support and service options. If you do not have an active internet connection, you 
can find contact information about your purchase invoice, packing slip, bill, or Dell EMC product catalog. Availability varies by country and 
product, and some services may not be available in your area. To contact Dell EMC for sales, technical assistance, or customer service 
issues:

Go t

Dell.com/support/home

.

Select your country from the drop-down menu on the lower right corner of the page.

For customized support:

a Enter your system Service Tag in the 

Enter your Service Tag

 field.

b Click 

Submit

.

The support page that lists the various support categories is displayed.

For general support:

a Select your product category.
b Select your product segment.
c Select your product.

The support page that lists the various support categories is displayed.

For contact details of Dell EMC Global Technical Support:

a Click 

Global Technical Support

.

b The 

Contact Technical Support

 page is displayed with details to call, chat, or e-mail the Dell EMC Global Technical Support 

team.

Documentation feedback

You can rate the documentation or write your feedback on any of our Dell EMC documentation pages and click 

Send Feedback

 to send 

your feedback.

Accessing system information by using QRL

You can use the Quick Resource Locator (QRL) located on the information tag in the front of the R540, to access the information about 
the Dell EMC PowerEdge R540.

Prerequisites

Ensure that your smartphone or tablet has the QR code scanner installed.

9

Getting help

183

Содержание E46S001

























































































































































































Отзывы: