Installing and removing server components
12
4
Installing and removing server components
Safety instructions
WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not
attempt to lift the system by yourself.
WARNING: Opening or removing the system cover while the system is powered on may expose you
to a risk of electric shock.
CAUTION:
Do not operate the system without the cover for a duration exceeding five minutes.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online
or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that are shipped with your product.
CAUTION:
Operating the system without the system cover can result in component damage.
NOTE:
Dell recommends that you always use a static mat and static strap while working on components
inside the system.
NOTE:
To ensure proper operation and cooling, all bays in the system and system fans must be populated
always with a component or with a blank.
Before working inside your system
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Step
1
Turn off the server, including any attached peripherals.
2
Disconnect the system from the electrical outlet and disconnect the peripherals.
3
If applicable, remove the system from the rack.
For more information, see the Rack Installation placemat at
.