ATTENZIONE! Poiché il cabinet è molto pesante assicurarsi di essere in un numero sufficiente di persone e di avere un appoggio
sicuro prima di spingerlo sullo scivolo.
ADVERTENCIA! El bastidor es pesado. Asegúrese de contar con ayuda suficiente y de tener un apoyo seguro antes de colocar
el bastidor en la rampa.
WARNING:
Balance the cabinet from the sides; do not grasp the plastic bezels or other components on the front of the cabinet.
DO NOT STAND IN FRONT OF THE CABINET
EMC2846
Position and level the cabinet
About this task
EMC2847
1 3/8-in.
Power requirements
Depending on the cabinet configuration and input ac power source, single or three-phase, the cabinet requires two to 12 independent
power sources. To determine your site requirements, use the published technical specifications and device rating labels. This will help
provide the current draw of the devices in each rack. The total current draw for each rack can then be calculated. For Dell EMC products,
visit the "Dell EMC Power Calculator" on the web at http://powercalculator.dell.com.
Table 1. Single-phase power connection requirements
Specification
North American
3 wire connection (2 L and 1 G)
International and Australian
3 wire connection (1 L, 1 N, and 1 G)
Input nominal voltage
200 - 240 V ac +/- 10% L - L nom
220 - 240 V ac +/- 10% L - L nom
8
