Page 2
Delkin Devices User’s Manual
USB CF / SM / SD / MMC / MS Reader/Writer
DDREADER-18
Figure 1: Windows Installation Program
Figure 2: Macintosh Installation Program
1.
Insert the Driver CD-ROM, then
double-click on the CD icon.
2.
Select
Reader-18
from the product
list. (See Figure 2)
3.
Click the button labeled
Install
and
follow the on screen instructions.
Select
Restart Computer
after
installation is complete.
4.
You may now insert a card and
access it like other drives by clicking
the Removable Disk drive icon on
your desktop.
Hardware Installation
Insert the USB plug of the Reader-18 directly into the USB port of your computer or hub.
See inside front cover for illustration. On some systems, connecting the reader to a hub
or keyboard port may not supply enough power to the reader. In this case the reader
should be connected directly to the computer or, if possible, connect the hub to a power
source.
4.
Verify that your product matches the one pictured on the screen.
5.
Click the
Install
button and follow
the on-screen instructions. For
best results, allow the drivers to
be installed into the default
locations.
6.
When the
Setup Complete
screen
appears, click the
Finish
button.
7. Connect the Reader-18 to the
USB port or powered hub.
8. You may now insert a card and
access it by clicking the
appropriate
Removable Disk
drive icon in
My Computer
.
Driver Software Installation Procedure for Apple Macintosh
Driver installation is not necessary for Mac OS X 10.2. The Reader-18 will use the Mass
Storage Device (MSD) drivers native to the operating system.
Apple Macintosh OS 8.6 / 9
Before connecting the eFilm Reader-18, you must install the device drivers located on
the accompanying CD-ROM. To avoid compatibility issues, install only the Reader-18
driver. Mac OS 8.6 requires USB Manager 1.4 or higher.
Prior to any software installation, always ensure you have backed up your hard drive and
prepared a recovery disk.
