Page 4
Delkin Devices User’s Manual
USB Memory Stick Reader
DDREADER-17
Formatting a Memory Stick
Although most cards are factory formatted, some cameras and other digital devices may
require the card to be formatted in the camera or device before initial use.
Macintosh users: DO NOT format or initialize Memory Stick with the computer. Only
format a card using the camera or Memory Stick device.
•
Formatting a Memory Stick will erase all pictures or files on the card.
•
Formatting should be performed in the camera or Memory Stick device to insure
compatibility.
•
Formatting should not be used to clear unwanted files from the card.
If you do wish to format a card with a computer, perform the following steps:
.
1.
In My Computer, right-click on the appropriate
Removable Disk
.
2.
Select
Format
and follow on-screen instructions.
Operational Notes
•
A corrupt file on your Memory Stick can cause a device failure or system crash when
transferring files to your computer. Recovery programs such as Scandisk can be
used to detect and repair most disk errors. It may also be necessary to re-format the
card, which will erase all files stored on the card. Some of the causes of file
corruption are:
> Unsteady power supply while transferring files, such as a low camera battery or
improperly connected reader.
> Card removed from reader or camera, or any other type of interruption while
transfering or accessing files.
> Improperly formatted card.
•
A Memory Stick that cannot be accessed by the Pocket Reader-MS can be placed
back in the camera, where the cameras picture viewing option can be used to
determine if the card is functioning normally. If the card no longer functions in the
camera, this may indicate a file corruption or other problem with the card.
•
Minor malfunctions while using the Pocket Reader-MS, such as system hangs, can
usually be resolved by simply re-booting the computer. Serious or recurring
malfunctions may require a re-installation of the Pocket Reader-MS drivers.
Compatibility Note
Your new Reader is part of a system of components that must function correctly and
compatibly in order to complete the simple process of moving pictures from your camera
to your computer. The components involved are the Reader, Camera, Storage Card,
Computer (and its numerous components), USB Interface, Software Drivers, and
Operating System.
