Deliberant DLB21 Series Скачать руководство пользователя страница 7

Страница: 7 / 65

The second thing you will do is configure the Wireless Basic Settings. Make sure the ‘Disable Wireless LAN Interface’

checkbox is not checked. The Mode needs to be set to ‘AP’. The SSID can also be changed at this point, if desired.

NOTE:

For ease of management, you may also want to change the LAN IP address to reside on the subnet your other PCs

will be on.

This is all you have to do for a basic bridged access point. You will need to reboot the unit for the changes to take effect.

Access Point (Router)

This configuration is an access point with NAT enabled. The router is assigned a WAN address, and all connections on the

wireless LAN side are masqueraded behind the WAN address. In this setup, the wireless connection is the LAN interface and

the ethernet connection is the WAN interface. This setup is useful when multiple computers need network access, and there is

a shortage of available IP addresses.

Содержание DLB21 Series


































































Результаты поиска

Содержание DLB21 Series

Отзывы:

Похожие инструкции для DLB21 Series

Бренды по названию

Популярные бренды

Deliberant DLB21 Series, Руководство пользователя

Результаты поиска

Содержание DLB21 Series

Отзывы:

Похожие инструкции для DLB21 Series

Бренды по названию

Популярные бренды