Deli 888T, Руководство пользователя

Страница: 17 / 26

1. Facing the front of the printer, press the open button for the top cover with
both hands simultaneously, lift the top cover up, and the printing support
brackets will automatically open.
2. First pass the ribbon recovery core through the print support set from top to
bottom, then press the right end of the ribbon supply core onto the spring-load-
ed ribbon pin on the ribbon supply shaft, and then install the left end of the
ribbon into the ribbon For the rear dial group, rotate the supply shaft core until
the notches are aligned and locked to the rear dial group on the left side of the
supply shaft. The installation method of the ribbon recovery shaft is the same
as above, press its right end on the ribbon recovery
On the ribbon pin of the shaft, put the left end of it into the ribbon front wheel
set and lock it.
printing support
brackets
ribbon supply core
ribbon pick-up core
rear ribbon wheel set
carbon ribbon
rubber roller
front ribbon wheel set
3.1.4 Install the Thermal Transfer Ribbons(DL-888T only)