Deli 33022, Руководство пользователя, Страница: 12 / 15

Turn on
Hot
laminating
Cool
laminating
Turn off
Connect the power plug
Open the back guide plate which is also the way to power
on(the power switch hidden inside turns on automatically).
If hot plastic cement is needed, adopt hot laminating film(50-125mic).
Turn the temperature adjusting knob to the position of hot laminating,the power indicator will on in red
After about 7mins ’ for preheating the green heating indicator lightens
and stops flashing, indicating that it finishes preheating and is
ready for laminating.
After hot laminating Turn the temperature adjusting knob to the position of the
cool laminating after cooling 5 to 10 mins,then close the back
guide plate,pull o
ff the plug. if after cool laminating can close the back guide and pull o ff the plug directl y.
If cool laminating is needed, adopt cool laminating film.
Turn the temperature adjusing knob to the position of
the cool laminating and begin to laminating directl
y.
If cool laminating is needed after the hot laminating for aperiod
of time,Turn the temperature adjusting knod to the position
of the cool laminating arrowhead and begin to laminate
only after the machine running without laminating object for 10min.
.
Rejceting
film
k
fil
Do not
When laminated objects are rolled into the machine ,or if the objects is tilted, or if you need to remove the objects from the machine,
pls press the eject button, the inversion lock will pop up automaticall
y, the machine is in inverse mode, you can start removing the
object. When pressing the inversion lock, the back button will pop up automatically ,and the machine is in forward mode.