Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Delfield
™
®
UC4432N
Exterior top
is one-piece, 22-gauge stainless steel with
integral square nosing on the front.
Exterior back and bottom
are two-piece 24-gauge galvanized
steel.
Exterior ends
are stainless steel.
Interior sides of door models
are thermoformed ABS
plastic with integral shelves supports. Interior back is one-
piece 22-gauge stainless steel. Interior bottom and top
are thermoformed ABS plastic. Base is fully insulated with
high-density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane.
Refrigeration
system uses HFC-404A refrigerant. Compressor
is 1/5 H.P., with condenser coil and condensate evaporator
mounted on rear of the cabinet. Evaporator coil are located
on the interior rear wall of the cabinet. Refrigerant flow is
controlled by a capillary tube. Cabinet maintains an interior
cabinet temperature of 36°F to 40°F (2°C to 4°C).
ACT control.
ACT electronic, solid state control, mounted on
the exterior rear of the cabinet, allows unit to maintain precise
temperatures in heavy duty conditions.
Electrical connections
are 115 volt, 60 Hertz, single phase.
Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
Casters:
Equipment is mounted on 2” (5.08cm) diameter front
locking plate casters. 2.5” (6.35cm) ride height.
Doors
have a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet of door
models has one adjustable epoxy-coated wire shelf.
Drawers
have a 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Drawer units have two drawers. Top
drawer holds two 12” x 20” (30.5cm x 50.8cm x 10.1cm) 4"-6"
deep pans. Bottom drawer holds one 12" x 20" and three 1/6
size 4" deep pans. Pans are supplied by others.
Specifications
Standard Features
Options &
Accessories
100% front breathing, which allows the unit to be
pushed against a wall or built into a cabinet or an
existing line up
Durable, rugged stainless steel sides, top and
front
Features Delfield’s exclusive ABS interior (on
sides). ABS is extremely durable - it won’t dent,
chip or corrode and is backed by a limited lifetime
warranty
Heavy duty self-closing hinges
“D” prefix models feature Delfield’s exclusive new
drawer system. Drawers are backed by a 10-year
warranty on the track assembly
Environmentally friendly R404A refrigerant
High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and
installation
60-cycle single phase electrical system
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed
per door section
ACT solid state electronic control
One year parts and 90 day labor standard
warranty.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
UC4432N
Single section refrigerator undercounter with a door
UCD4432N
Single section refrigerator undercounter with drawers
•
•
Models
UC4432N Undercounter
Front-Breathing Undercounter Refrigerators
U
C4
43
2N
U
nd
erc
ou
nte
r
Fro
nt-
Bre
ath
in
g U
nd
erc
ou
nte
r R
efr
ig
era
to
rs
Flat lift off cover
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
Exterior thermometer
Interior lights
Glass door(s)
*220V/50 Hertz electrical
system
* Inclusion of this option will
alter electrical specifications
of the unit.
•
•
•
•
•
•
•
•
•
•
