Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Delfield
™
®
Exterior top
is one-piece 22-gauge stainless steel with integral 2.12”
(5.1cm) square nosing on the front. Telescoping lid is constructed of
20-gauge stainless steel. Top opening can accept 18, 24 or 30 1/6 size
plastic pans 4”-6” (10.1cm-15.2cm) deep. Adapter bars and 1/6 size pans
are supplied by Delfield. Temperature in top openings maintains 33°F
(1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient room
temperature, meeting NSF 7 requirements. One 72” x 8” x .5” (183cm x
20.3cm x 1.3cm) polyethylene cutting board treated with antimicrobial
agent is mounted on the top at the front edge.
Exterior back and bottom
are two-piece 24-gauge galvanized steel.
Exterior ends are stainless steel.
Interior
sides are thermoformed ABS plastic with shelf supports. Base is
fully insulated with high-density foamed in place environmentally friendly,
Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane.
Refrigeration system
uses HFC-404A refrigerant. Compressor is 1/2 H.P.,
with condenser coil and hot gas condensate evaporator mounted on rear
of the cabinet. Evaporator coils and temperature control are located on
the interior rear wall of the cabinet. Refrigerant flow is controlled by a
capillary tube. Cabinet maintains an interior cabinet temperature of 36°F
to 40°F (2°C to 4°C).
ACT control.
ACT electronic, solid state control, mounted on the exterior
rear of the cabinet, allows unit to maintain precise temperatures in heavy
duty conditions.
Electrical
connections are 115 volt, 60 Hertz, single phase. Unit has a 7’
(2.1m) long electrical cord and NEMA 5-15P plug.
Casters:
Equipment is mounted on 2” (5.08cm) diameter plate casters with
front two locking. Equipment clearance above the floor is 2.5” (6.35cm).
Doors
have a 24-gauge stainless steel exterior, with thermoformed ABS
plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf
per door opening.
Drawers
have 24-gauge stainless steel exterior with thermoformed ABS
plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer
slides are 11-gauge stainless steel with Delrin bearings. Each top drawer
holds one 12” x 20” (30.5cm x 50.8cm) pan and three 1/9 size pans 4”-6”
(10.1cm-15.2cm) deep. Each bottom drawer holds one 12” x 20” (30.5cm
x 50.8cm) pan and three 1/9 size pans 4” (10.1cm) deep. Pans are supplied
by others.
Specifications
Standard Features
Options &
Accessories
Patented air screen ensures product stays cold without
drying it out
All 4400 Series units are 100% front breathing, which allows
the unit to be pushed against a wall or built into a cabinet
or an existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
Delfield supplies 1/6 size pans and adapter bars for top
opening
Mega top refrigerators are standard with 8” wide, dishwasher
safe polyethylene cutting board treated with anitmicrobial
agent
“D” prefix models feature Delfield’s new drawer system.
Drawers are backed by a 10-year warranty on the track
assembly
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane keeps
energy costs low
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed per door
section
ACT solid state electronic control
"ST" models have a 4" stainless steel backsplash
One year parts and 90 day labor standard warranty.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ST4472N-18M
Three section with doors eighteen pan capacity
STD4472N-18M Three section with drawers eighteen pan capacity
ST4472N-24M
Three section with doors twenty-four pan capacity
STD4472N-24M Three section with drawers twenty-four pan capacity
•
•
•
•
Models
ST4472N Mega Top
Front-Breathing Self-Contained Compact Mega Top Refrigerators
ST
44
72
N
M
eg
a T
op
Fro
nt-
Bre
ath
in
g S
elf
-C
on
ta
in
ed
C
om
pa
ct
M
eg
a T
op
R
efr
ig
era
to
rs
Flat lift off cover
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
Exterior thermometer
Glass door(s)
*220V/50 Hertz electrical system
* Inclusion of this option will
alter electrical specifications
of the unit.
•
•
•
•
•
•
•
•
•
ST4472N-18M
