Delfield Mark7, Руководство по установке

Страница: 11 / 16

Part Number: 9291481 05/18 11
Section 2 Installation
Toe Plate Installation
44. Install the toe plate by hooking it over the top of the
galvanized bracket at the bottom of the unit.
45. The toe plate then drops down and fits under the
galvanized bracket without the use of fasteners.
46. The toe plate will stay in place but can also be easily
removed for cleaning under the units.
Toe Plate Installation
Toe Plate Return Installation
47. Place toe plate return over return kick plate bracket and
secure with two #8 x 0.75” pan Phillips head screws.
Finished Back Panel Installation
48. Depending on the length of the panel, more than one
person may be required.
49. Align the panel at both ends of the unit, inserting the
top in the channel.
50. Push the panel to the top of the channel.
51. Lower the panel toward the unit fitting it into the
bottom groove. The panel will fit securely, no fasteners
are needed.
Three-Bar Tray Slide Installation
52. Three-bar tray slides are attached to the provided
brackets by the use of the screws located on the
underside of the brackets.
53. When splines are necessary, 0.87” (2.2cm) diameter
rods are inserted into one end of the tubing.
54. The matching tubing from the adjacent tray slide is
then slipped over the rod to achieve the spline.
55. Adjust to create a smooth and tight rod joint.
56. Set screws are used on the underside of the tubing to
hold the joint together.