MSR213U Simple Manual
2009-02-13
original purchaser, and in no circumstances covers incidental or consequential damages though consumers’ misuse or
modification of the products.
INSTALLATION
1) Insert USB connector to a free USB port on the PC system.
2) The LED of MSR213U will turn green indicating that the device is ready
for use.
READER TEST
MSR213U is the HID Keyboard emulation device to work with the
Windows XP/2000 applications that can accept the keyboard input. The
following process would help to identify MSR213U installed properly or
not.
1) Run the Notepad application from Start
Æ
Programs
Æ
Accessories
Æ
Notepad under Windows XP/2000
2) Swipe any card through the reader MSR213U.
3) The card data should appear on the Notepad if the MSR213U installed
properly.
SPECIFICATIONS
Recording Method
Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA
Swipe Speed
5 to 55 inch/sec (worst case with +/- 15% jitter card)
Power Requirements
+5VDC, +/-5%
Operating Temperature
-10
°
C to +55
°
C
Operating Humidity
5% to 95% relative humidity
Magnetic Head Life
Min. 1M swipes
Dimensions
100L x 34W x 28H mm
Weight Approx.
120g
Connector
USB series “A” plugs
DATA OUTPUT FORMAT
HID & I Mode
Preamble
Card Data
Postamble
TK1 Prefix
TK1 Data
TK1 Suffix
TK2 Prefix
TK2 Data
TK2 Suffix
TK3 Prefix
TK3 Data
TK3 Suffix
M Mode
TK1
Data
TK2
Data
TK3
Data
NOTICE: The issuer of this manual has made every effort to provide accurate information. The issuer should not be
held liable for any technical and editorial omission or errors made herein; nor for incidental consequential damages
resulting from the furnishing, performance or use of this material. This document contains proprietary information that
is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or
translated without the prior written consent of the issuer. The information provided in this manual is subject to change
without notice.
PM072-S Revision B
2
