Del Morino RES, Руководство по эксплуатации и обслуживанию

Страница: 13 / 39

13
G
REASING
All greasing points are equipped with HYDRAULIC TYPE MODEL “A” UNI 7663 greaser fitting.
To grease use only MULTIFUNCTIONAL GREASE LITHIUM BASED Type NLGI 2.
RES15-20-30 : refer to the drawing which shows the 20 greasing points: the 2 points "X," one for each
stabilizer, are accessible by removing the two covers “B”, the other 18 points, “Y,” are in the open or
accessible through appropriate holes.
RES10-50 : The greasing points are located on both cylinder bushes.
Greasing operations must be done according to the intervals shown in diagram “A”.