Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / [email protected]
Technische Daten können ohne Vorankündigung geändert werden. Irrtümer vorbehalten.
Technical Data can be changed without advance notice. Errors excepted.
11.09.2018
3 / 4
Dear customer,
thank you for deciding to purchase our product. The product fulfils the requirements of effective European and
national guidelines.
To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the
product notes and the operation manual! They contain important information for the start-up and handling. It is
important, therefore, that these documents are archived carefully for referring to information at a later stage.
1. Safety Instructions
We are not responsible for any property damage or personal injury caused by failure to observe these product
notes and manual, improper handling or unauthorised modifications.
It can only be installed by a qualified electrician.
Make sure that the item has not been damaged during transport before putting the light into operation. It may
not be operated if there are any damages to electrical parts.
The luminaire may only be operated completely with its protective cover.
It may only be operated once removed from the packaging.
The type plate must not be removed.
The connection lines in the building must be disconnected before installation and secured against being
switched back on. For this, trip the corresponding fuse switch in the building installation.
Make sure the electrical specifications for the connection lines correspond with the specifications given on the
nameplate of this product.
Please take care during installing for the correct polarity (V+, V-) and do also use the right power supplies with
the following safety measures: SELV = Safety Extra Low Voltage, overload protection and short-circuit
protection.
Make sure that the cables and plugs are not subject to tension or torsional forces and do not bend the cables.
Protect all cables and insulation against possible damages.
Output lines should be laid separately and spaced apart from other lines. The power supply cables and the
lamp feeders must not cross each other.
Before disposal of the packaging material make sure that all components are removed.
Keep packaging material away from the reach of children and pets. The packaging contains small parts that
may be swallowed by children.
Only operate in water with safety transformer. The maximum installation depth is 2.00 m.
Underwater lamp, Snapper I WW, Artikel Nr.: 131002
Product-Notes
