Product-Notes
Manual
Article No.: 843000
Deko-Light Elektronik-Vertriebs GmbH
25.01.2019
www.deko-light.com / [email protected]
Technical Data can be changed without advance notice. Errors excepted.
6/9
9.
Function - On / Off
The ART 4RGBW can be connected to a DC voltage of 12V to 24V. Then the display of the power button lights
up, the unit turns on and assumes the same settings as the last time.
In normal mode, touch and hold the POWER button 2s to put the ART-9RGBW into standby mode. At this time
the output is switched off. Tap the power button and hold for 2 seconds to turn the unit on.
9.1. Setting Shortcut for Power ON/OFF
● Hold down the „P“ and „Power“ buttons simultaneously for about 10 seconds until all buttons flash once
briefly.
● Press the „Power“ button once and the ART-4RGBW go into standby mode. Press any key to start the ART
9RGBW.
● To delete the Speed Dial on / off, press and hold the „P“ and „Power“ buttons simultaneously for about 10
seconds until all buttons will blink once.
9.2. Setting Fadetime for Power ON/OFF
●
Hold the button „Power“ button for 5 seconds until all LEDs blink once. Release the Power button and the
button flashes repeatedly.
●
Choose one of these buttons 1-4, P, C, B or S according to set the fade time as in the table
Key
1
2
3
4
P/C/B/S
Fade-Time 1s 2s 3s 4s 0s (no Fade-Time)
● All indicator lights will flash once to confirm the setting.
●
The existing mode ends and automatically switches to normal operation.
10. Built-in Program
●
Hold for about 1 second the button „P“ to activate the integrated program menu. The following is a key tone
and the indicator lights.
●
Then turn the dial to select a desired integrated program. There are 10 programs, as well as an auto-
program to choose from.
(The Automatic Program is the
sequential operation of all 10 programs)
● When selecting individual programs through the dial a key tone is heard. After key tone the selected
program is activated.