Manual
Article No.: 180034
5
2. Touch-Remote
Dimensions (LxBxH):
110 x 52 x 20 mm
Battery:
2x AAA batteries
Distance:
ca. 20 m
Frequency:
2,4 GHz
5. Installation
1. Connect Touch-Controller with bulb
a.
Switch on the LED Bulb and then push and hold the „ON“ button within 1 sec.on the
Touch-Controller, after that the bulb flashes up 3 times, then the Touch-Controller and the
bulb are connected.
b. If this step isn’t working please try again.
2. Disconnect Touch-Controller from bulb
Switch on the LED bulb and then push and hold the „ON“ button within 1 sec. again
till the bulb flashes up 9 times, then the Touch-Controller and the bulb are disconnected.
Now you can address the bulb again with the same or another Touch-Controller.
On/Off Switch
Program Button “P”
Speed Button “S”
Touch Dimmer Scale
