SECLUSION SERIES
BRACKET
INSTALLATION
9065-0122 REV K
10 Mountain View Drive | Shelton, CT 06484 | P:
203-924-6617
| www.
dekkopower.com
© ECA
–
January 20
20
—
Product specifications subject to change without notice
Under Table Mounting
Table Top Mounting
Plug into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and regulations.
For use with:
Do not use provided screws on table thicknesses less than 1.00”.
Note: *
Use caution not to pierce top surface with screws.
Installation Instructions:
1-
Determine if Seclusion (A) is to be mounted on top or under table.
2-
Attach either Table Top Bracket (D) or Under Table Bracket (E) to
Seclusion using Bracket Screws (B), provided. Note: for under table
mounting, the Seclusion
must be a minimum of 1” back from the
table’s edge.
3-
Determine location for Seclusion and attach to table, as shown, using
Mounting Screws (C), provided*.
4-
Make data connections if required (use caution when snapping RJs
into faceplate to prevent them from falling into Seclusion).
5-
Connect all power and data cabling as needed.
Tools Needed
Components & Hardware
(A) Seclusion, Qty. 1
(C) Mounting Screw
#10
x .75”
, Qty. 3
(D) Table Top Bracket, Qty. 1
(E) Under Table Bracket, Qty. 1
(B) Bracket Screw
#8
x 5/16”
Qty. 2
